About

 

We have stumbled upon this post involving No Hot Water — Water Heater Repair directly below on the internet and decided it made sense to relate it with you on this site.

Several contemporary homes use an electrical water heater for their furnace, because of its ease and simplicity of use. Nevertheless, similar to any other electrical home appliances, issues may arise with its usage, suddenly. It can be actually frustrating to get up to a cold shower instead of a warm one or having your bathroom with water that isn't warm adequate or perhaps too warm. Whatever the instance may be, water heater issues can be quite stressful. Fortunately, we have actually made a listing of possible solutions to your hot water heater concerns. There are a number of variables that might trigger a number of these issues, maybe a problem with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you shut off the main power supply for security. Whatever the trouble is, getting it taken care of ought to not pose too much of a concern if you comply with these actions:

 

Call A Professional:

If after replacing all malfunctioning components as well as resetting your temperature, the hot water heater still isn't functioning, you may require to get in touch with an expert plumber for an expert opinion. The problem with your heating unit could be that the cold and hot faucets have been switched over or it may be undersized for the quantity of hot water required in your house. Whatever the situation may be, a professional plumber would certainly assist solve the issue.

 

Check Your Power Supply:

As fundamental as this may seem, it is extremely necessary. Without appropriate power, your water heater will certainly not function. So the first thing to do when your water instantly stops working is to confirm that it isn't a power trouble. Inspect if the fuse is blown out or the breaker tripped. If the circuit breaker is the problem, merely turn it off and on once more. Change any kind of busted or worn-out fuse. Test the home appliance with power after these modifications to see if it's currently functioning.

 

Check Your Thermostat:

If your hot water heater still isn't working or the water coming out isn't warm enough, you may need to examine the temperature settings on your top thermostat. Guarantee the breaker is turned off prior to doing anything. Open the accessibility panel and also press the red switch for temperature reset above the thermostat. This ought to aid heat up the water. Turn the circuit breaker back on and inspect if the issue has been settled.

 

Inspect the Burner in the Water Heater:

If it's not a power issue, then try having a look at your heating element if it is still working. Test each of your burner to be sure the trouble isn't with any one of them. If any of them is malfunctioning, replace that part and afterwards examine whether the hot water is back on.

 

Conclusion

Water heater issues are not always significant. Much of them result from minor concerns like a blown fuse or damaged heating element. Replacing the malfunctioning parts need to do the trick. Nevertheless, if you are still not able to solve the issue, give a call to your local plumber to find to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

I hope you liked our post on What Would Cause My Electric Water Heater to Stop Working?. Thank you so much for taking the time to read through our blog post. Sharing is good. Helping people is fun. Thank you for your time spent reading it.

Let's solve it, call now!